Partner and Lazulite elevators
Rcmaster199 at aol.com
Rcmaster199 at aol.com
Wed Nov 10 07:22:15 AKST 2004
Earl, was the new stab larger, smaller or same as the stock stabilizer.
MattK
In a message dated 11/10/2004 10:12:13 AM Eastern Standard Time,
ehaury at houston.rr.com writes:
Tom
I've flown the Partner with both the stock elevators and elevators similar
in size to the Smaragd. I initially found the Partner too pitch sensitive
around neutral for my taste, even after moving the CG to the front of the wing
tube socket. (The correct location according to Quique, and trimming
exercises.) A friend flies a Smaragd and felt that the elevator was much softer around
neutral, so I built another set of stabs with the larger elevators (hinge
line moved forward). This is one of those counterintuitive things. I prefer the
feel of the larger elevators around neutral and find no degradation of snaps.
There is a slight improvement in spin entry.
Another reason some have used larger elevators is that moving the hinge line
forward allows the control horns to be closer to the fuselage, which is
desirable when using pull-pull cables for linkage (I don't).
Earl
----- Original Message -----
From: _Koenig, Tom_ (mailto:Tom.Koenig at actewagl.com.au)
To: _Discussion_ (mailto:discussion at nsrca.org)
Sent: Tuesday, November 09, 2004 9:44 PM
Subject: Partner and Lazulite elevators
Hi again all,
Owners of the Pl Partner and Lazulites, I would like your thoughts.
Before I finish the stabs and elevators, I am somewhat concerned at the very
small elevators found on these models. I've seen one Partner fly and the
owner suggested to DEFINATELY enlarge the elevators. I tend to agree...but who
am I to argue with Quique and the Matt's design philosophy.
If the consensus is to make them bigger, then I will, as sofar I'm not
comfortable with their current size.
Thanks for any ideas.
best regards
Tom
PS: If any of you have been cruising on any Aussie sites recently....the guy
who just had his behind kicked at our State champs and W/C team trials...was
NOT me ( he just happens to look like me, have the same name and job, seems
to be married to the same woman....OK..... OK it was me, I admit it !)
Shall we just say I had a shocker of a weekend ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041110/5109563d/attachment.html
More information about the NSRCA-discussion
mailing list