Sanity check

[Jim Ivey]

 John
Fix all wing sockets or stab sockets, with thin ca on the tube. Sand with 320 grit for a snug fit. Of course clean the tube first.It works for carbon or aluminum tubes.

Jim Ivey
> 
> From: "John Pavlick" <jpavlick at idseng.com>
> Date: 2004/11/07 Sun PM 08:57:58 EST
> To: <discussion at nsrca.org>
> Subject: Sanity check
> 
> I just want to make sure I'm not thinking myself into a bad place...
> 
> Here are some questions you guys might be able to help with:
> 
> 1. What is the biggest prop my O.S. .61SF (LS) can swing? No pipe, just a
> muffler and a VP-30 pump setup.
> 
> 2. Is it OK to run 100% synthetic oil (no castor) in an ABC motor?
> 
> 3. What's the best way to check aileron differential?
> 
> 4. How do you fix a loose wing tube socket (on the tube, not in the wing)?
> 
> TIA
> 
> John Pavlick
> http://www.idseng.com
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
> 
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.