composite control horn

[Bob Richards]

Not to get off the subject, but I don't think I would want any plane with the name "Impact". I would not want it to live up to its name. :-)
 
Bob.


Michael Laggis <fishgod at pobox.mtaonline.net> wrote:
Scott,
On my impact, I replaced the phenolic control horns with ones cut out of .074 Uni Carbon.  It is more then strong enough to accept ball links.  I just traced out the phenolic horn on the carbon and used my scroll saw to cut them out.

Thanks
Michael Laggis
AKA Moose Boy
NSRCA 3618 
http://www.alaskarc.org

----- Original Message ----- 
From: Scott Anderson 
To: NSRCA 
Sent: Wednesday, November 03, 2004 3:30 AM
Subject: composite control horn


Ok Guys,
 
I have been looking at several of the composite 2M planes like OTOP,IMPULSE,IMPACT and they all are using some sort of composite control horn that you put a notch into the surface and glue it into place...  So since I have not seen one in person I have some questions.. how can you fine tune this( up/down- no threads?)  and use a ball link ..?... and could you use like the MK horns with the composite wing? or a different style?
If anyone has pics also that would be great..
 
Thanks
Scott
NSRCA 529
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041103/c782cf0c/attachment.html