[SPAM] RE: Nylon gears for Airtronics 94358

[ronlock at comcast.net]

The 94161 I have is metal geared.  
Ron Lockhart

-------------- Original message -------------- 

Ed:
I think that the old 94161 gear set fits the 94358 and as I recall it is nylon.
regards,
Terry
----- Original Message ----- 
From: ronlock at comcast.net 
To: discussion at nsrca.org ; discussion at nsrca.org 
Sent: Monday, November 01, 2004 7:42 AM
Subject: [SPAM] RE: Nylon gears for Airtronics 94358


Ive had same experience with the 94358s, in a pattern bird with soft mount engine, the metal gears hold up pretty well.
Ron Lockhart
-------------- Original message -------------- 

> Hey Ed, 
> 
> I'll be talking to Bobby at Airtronics this week and will let you know. I've 
> been using the 358's for rudder servo's since they were available and the 258's 
> and 158's prior to that. Awesome servo's for strength and speed. I have never 
> changed away from the metal gears, but then with a servo that strong, I haven't 
> had a lot of wear using them just on the rudder. 
> 
> Mark 
> 
> 
> 
> ________________________________ 
> 
> From: discussion-request at nsrca.org on behalf of Ed Alt 
> Sent: Sun 10/31/2004 8:52 AM 
> To: discussion at nsrca.org 
> Subject: Nylon gears for Airtronics 94358 
> 
> 
> Are nylon replacement gears available for the Airtronics 94358? If not, has 
> anyone ever fig! ured out some other combo of available nylon gears to make this a 
> useful Pattern servo? I've got a few of these with worn out metal gears from my 
> IMAC days and would like to use them again if possible. They're a fairly good 
> servo for a non-digital. 
> 
> Thanks 
> Ed 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041101/63404e45/attachment.html