Prop size

[Bob Pastorello]

For that setup, at least 20-25% nitro will be needed to turn the higher pitch props, Like 16.5 x 13N, or 14N.  Running the Pitts muffler really takes away from the ST's ability to turn some wood....

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Alan Hewson 
  To: NSRCA 
  Sent: Sunday, May 30, 2004 2:43 PM
  Subject: Prop size


  I am running a SuperTigre ST2300 on 15% Cool Power and a pitts muffler and Cline regulator. It is turning an APC 17 X 10N prop at about 7900 rpm.
  I would like to switch to a prop that will give some more pull. I have lots of ground clearance.
  Any recommendations ?


  Laughing is good exercise......It's like jogging on the inside.

  For all your Picture Framing needs, go to www.countryworkshop.ca


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040530/63e5a177/attachment.html