Right to left 05 drawings

[george kennie]

I must still be in the sone age! I still do this to duplicate the other side of my fuse, however I found that the
oil leaves the plans looking like crud forever, so on my last effort I tried a trick. Instead of the trusty
safflower oil I tried rubbing alcohol and it worked quite well. You do have to work quickly as the alky is quick
to evaporate, but when it dries the plans appear as if they had never been stupified.
G.

Dean Pappas wrote:

> Yo Jay,
> I have flipped P05, and it will take the post-sandwich remains of another lunch hour to do F05.
> I'll send this to you directly, but who out there wants to post the file so that everyone can grab it?
>
> Now back in the sone age ...
> when your GrandPa needed plans for both wings and the kit plan only showed one half,
> he would just dampen the sheet of paper with cooking oil, flip it, put wax paper over it and build.
> Nowadays if you wanted to build really light, I guess you'd use sunflower or cannola oil. Ahem.
>
> Regards,
>         Dean
>
> -----Original Message-----
> From: Jason [mailto:jasonshulman at cox.net]
> Sent: Wednesday, May 26, 2004 10:29 AM
> To: NSRCA
> Subject: Right to left 05 drawings
>
> It finally happened....The wind shifted and practice was from Right to Left.
>
> Does anyone have or know where, to get Aresti drawings for the P-05 and F-05
> sequences from Right to Left?
>
> Thanks,
> Jason
> www.jasonshulman.com
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> ====================================# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.