K2R Spot Remover

[george kennie]

Jerry,
I can never feel sure that I've removed all the imbedded oil, even with
several applications of K2R, especially if the part is wood. With a glass part
I can feel much more confident by utilizing a good scrub with straight Dawn
dishwashing liquid applied to a very wet sponge(very warm water). If you still
don't feel confident, follow up with a dousing with acetone.
G.

Jerry Budd wrote:

> Hi all,
>
> Does anyone know if K2R Spot remover is available in California?  I
> seem to remember hearing something about the California Air Quality
> Board banning it.  I've checked most of the local retail outlets
> (drug stores, home improvement centers, etc) and haven't been able to
> find any.
>
> I'm about to strip, repair, and repaint the cowling on my E=MC3 and
> I'd like to make sure I get all the oil off the interior before I
> start.  K2R does a great job in lifting and drying out oil from wood
> so I thought I'd try it on the fiberglass.
>
> Suggestions?
>
> Thx, Jerry
> --
> ___________
> Jerry Budd
> mailto:jbudd at qnet.com
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.