Hanno Pump
Lem and Christina Stevens
landcstevens at comcast.net
Sat May 15 05:08:15 AKDT 2004
Don, Flipping over the flapper valve piece worked great. I have set the engine back up on the bench, but have not had it in the air yet. Thanks for the suggestion! Lem
----- Original Message -----
From: AtwoodDon at aol.com
To: discussion at nsrca.org
Sent: Wednesday, May 05, 2004 10:23 AM
Subject: Re: Hanno Pump
You can also reverse (turn them over) the plastic flapper valves in the pump and it will correct some minor problems if you have overheated the engine and baked the pump which caused the valves to take a different shape. Nothing to loose trying this if the pump doesn't work anyway.......... Just be very careful and inventory the pieces and positions as you take the pump apart.
Don
In a message dated 5/5/2004 6:11:47 AM Central Daylight Time, landcstevens at comcast.net writes:
Nat, is the 1.40rx pump just set for a higher volume? I wonder why Hobby Services didn't use some of the available pieces to repair it? I bet that all I need is to replace the plastic piece that acts as the stopper valve. I am sure that the metal pieces are fine.
Lem
----- Original Message -----
From: Nat Penton
To: discussion at nsrca.org
Sent: Wednesday, May 05, 2004 12:54 AM
Subject: Re: Hanno Pump
Lem you may be able to repair the pump yourself. If not the OS140RX uses the same pump, about $150 m/l.
----- Original Message -----
From: Lem and Christina Stevens
To: discussion at nsrca.org
Sent: Tuesday, May 04, 2004 10:00 PM
Subject: Hanno Pump
Does anyone have an OS PD-05 pump they are willing to sell? I have a Hanno 61 in a plane I just finished and the pump died. Hobby Services does not sell parts for this pump anymore. It is the later version of the Hanno that has one pump inlet and one pump outlet.
Please email landcstevens at comcast.net
Thanks,
Lem
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040515/aa6e8690/attachment.html
More information about the NSRCA-discussion
mailing list