[SPAM] Re: dual elev. pushrods

[David Lockhart]

I'm not sure when Chidgey first used the system, but my Dad and I built
several airplanes using that basic system with materials from ACP as early
as 1988 - and I don't think we were the first.  Have since shifted to the
carbon fiber nyrods as they allow the use of threaded fittings and don't
rely on the glue joints.

Regards.

Dave Lockhart
DaveL322 at comcast.net

----- Original Message -----
From: "Ed Miller" <edbon85 at optonline.net>
To: <discussion at nsrca.org>
Sent: Tuesday, May 11, 2004 4:10 PM
Subject: Re: [SPAM] Re: dual elev. pushrods


> FYI, I believe Ron Chidgey first introduced the "Troy Newman" elevator
setup
> but Troy did an excellent job of presenting it. Some of us in the
northeast
> have used this method for years. Works great, solid, very light and once
> installed and adjusted I've yet to ever have to adjust or maintain
anything.
> Ed M.
> ----- Original Message -----
> From: "Brian Billings" <auto7832 at bellsouth.net>
> To: <discussion at nsrca.org>
> Sent: Tuesday, May 11, 2004 3:00 PM
> Subject: Re: [SPAM] Re: dual elev. pushrods
>
>
> > BINGO! That is what I was looking for, and it was Troy Newman not Eric,
> > sorry Eric. Thanks Brian Y.
> > ----- Original Message -----
> > From: "Brian Young" <b4598070 at yahoo.com>
> > To: <discussion at nsrca.org>
> > Sent: Tuesday, May 11, 2004 1:56 PM
> > Subject: [SPAM] Re: dual elev. pushrods
> >
> >
> > > Is this what you had in mind?
> > >
> > > http://www.rcaerosport.com/articles/tech/ele%20control/intro.htm
> > >
> > > --- Brian Billings <auto7832 at bellsouth.net> wrote:
> > > > Can anyone tell me where I can find Eric Hendersons
> > > > article about a method he uses to run dual pushrods
> > > > for elev.
> > > >
> > > > Thanks Brian
> > > >
> > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Win a $20,000 Career Makeover at Yahoo! HotJobs
> > > http://hotjobs.sweepstakes.yahoo.com/careermakeover
> > > =====================================
> > > # To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> > > and follow the instructions.
> > >
> >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.