[SPAM] RE: Greve pipe setup

[Dean Pappas]

Hi Ed, 
I can't speak as to the length (though I could guess, I'll let someone who is actually running the combo give you the real dope) but you can straighten the bend in the header just a bit, and that will do the trick. Bend it cold, and use pieces of 2 X 4s  with snug holes drilled in it for the bending clamps.
Dean

-----Original Message-----
From: Ed Alt [mailto:Ed_Alt at hotmail.com]
Sent: Tuesday, May 11, 2004 7:54 AM
To: discussion at nsrca.org
Subject: Greve pipe setup


Looking for feedback on how to best set up the mounting on a Greve pipe setup in a Focus II.  Webra 1.60, Johnson header with 2 1/4" rise and 3 deg offset.  First issue is that there is essentially no clearance between the header and the glass pan.  Apparently you have to cut it and extend it.  I suppose you can just use silicon coupler to join the cut sections?  How much length of exposed silicon can you get away with between the two sections?
 
Next issue is that the aft end of the pipe needs to get directed down and away from the fuse bottom.  What sort of extension are you guys using and how do you attach it?
Thanks
Ed

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040511/10a275d2/attachment.html