voltage regulators with Li-Ion packs

[mike mueller]

 Troy do you use a nose ring with that setup? Thanks, Mike
Troy Newman <troy_newman at msn.com> wrote:
Ed,

I'm using the Jaccio stuff Jim Oddino makes. I don't use the switch version 
becasue it draws some small power when off. I use the non switch version and 
put it between the switch and RX....

I trust the Jaccio stuff have been using it for years now. I have used the 
5.2V and a couple of the 5.7V setups...

For batts I'm using the 2 cell NMP batts sold by Central...They are 2000mah 
and I get about 8+ flights of about 12mins using 5 digital servos. And 
running a hyde AR style mount on a YS DZ motor.....I have lots of flights on 
this system and it works the best for me.

Troy

>From: "Ed Alt" 
>Reply-To: discussion at nsrca.org
>To: 
>Subject: voltage regulators with Li-Ion packs
>Date: Thu, 6 May 2004 04:29:40 -0400
>
>Just looking for feedback on available regulators (Smart Switch etc) that 
>are rated to work with 2 cell Li-Ion battery packs. Outputs in the range 
>of 5.2 to 6V will work for me.
>Thanks
>Ed


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


		
---------------------------------
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040506/8cd79df4/attachment.html