voltage regulators with Li-Ion packs

[David Harmon]

Hi Ed..I am using 2 of the Jaccio regulators with the perfect switch set
at 5.1v and the NMP 2000mah Li-Ion battery.
http://www.centralhobbies.com/Electrical/switch_harness/Switchhar.html
http://www.centralhobbies.com/Electrical/Batteries/nmp/nmpbats.htm
 
Of course, they both work nicely and they solve several problems at the
same time.
I use the Schulze ISL 6-330 charger/discharger with the battery because
it works with all types of batteries, however,
the NMP charger is probably foolproof and low cost as well. 
 
Highly recommended.
 
Regards

Dave Harmon
NSRCA 586
K6XYZ[at]comcast[dot]net
Torrance, Ca. 
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ed Alt
Sent: Thursday, May 06, 2004 1:30 AM
To: discussion at nsrca.org
Subject: voltage regulators with Li-Ion packs
 
Just looking for feedback on available regulators (Smart Switch etc)
that are rated to work with 2 cell Li-Ion battery packs.  Outputs in the
range of 5.2 to 6V will work for me.
Thanks
Ed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040506/a980f482/attachment.html