Futaba 9ZAP Problem

[francisco zuloaga]

I think is better if you send it to Tony Stilman
Francisco Zuloaga

----- Original Message -----
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Wednesday, May 05, 2004 7:01 PM
Subject: Re: Futaba 9ZAP Problem


>
> On May 5, 2004, at 4:59 PM, Tony Quist wrote:
>
> > Did you try plugging it into an unused channel to see if it worked?  Or
> > just plug a servo into channel 3 and make sure the throttle stick
> > works?
>
> I haven't tried that.  I did look at the servo output and it reflects
> the throttle stick movement.  I will plug a servo into channel 3 and
> see if it works and I will try plugging the ESC into the rudder channel
> and carefully move the rudder stick.
>
> Ron Van Putte
>
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [mailto:discussion-request at nsrca.org]
> > On Behalf Of Ron Van Putte
> > Sent: Wednesday, May 05, 2004 2:51 PM
> > To: discussion at nsrca.org
> > Subject: Re: Futaba 9ZAP Problem
> >
> >
> >
> > I have received several suggestions and I appreciate them.  However,
> > some of the responses indicated that the writer didn't understand the
> > problem.  I had a flying system that was working perfectly.  Then one
> > day the throttle didn't work.  The first thing I tried was reversing
> > channel 3.   I ended up trying a totally untouched model on the 9Z
> > (default model).  It didn't improve anything.  Then I tried a different
> > transmitter, again with a totally untouched model.  It worked
> > perfectly.  I'm still stumped.
> >
> > Ron Van Putte
> >
> >> -----Original Message-----
> >> From: discussion-request at nsrca.org
> >> [mailto:discussion-request at nsrca.org]
> >> On Behalf Of Ron Van Putte
> >> Sent: Wednesday, May 05, 2004 10:16 AM
> >> To: discussion at nsrca.org
> >> Subject: Futaba 9ZAP Problem
> >>
> >> All - I have tried everything I can think of and still can't solve a
> >> problem.  I have a Futaba 9ZAP transmitter and was using it in the PPM
> >> mode to fly a GWS Slow Stick, using a GWS R4P receiver.  Everything
> > was
> >> fine until one day I went to fly the Slow Stick.  The aileron,
> > elevator
> >> and rudder servos worked fine, but the motor would not work.  I tried
> >> everything I could think of, including trying an unused model in the
> >> 9ZAP.  Nothing worked.  Then I tried a different Futaba 9ZAP
> >> transmitter and everything worked fine.  Huhhhhh?  Any ideas?
> >>
> >> Ron Van Putte
> >>
> >> =====================================
> >> # To be removed from this list, go to
> >> http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >> =====================================
> >> # To be removed from this list, go to
> >> http://www.nsrca.org/discussionA.htm
> >> and follow the instructions.
> >>
> >
> > =====================================
> > # To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > =====================================
> > # To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.