Futaba 9ZAP Problem

[JOddino]

Hi Ron,
Did you try a servo in that slot to see if the radio was basically working?
If it was, then it sounds like the throttle channel was somehow telling the
speed control to turn off.  Pretty strange.
Jim
----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Wednesday, May 05, 2004 10:15 AM
Subject: Futaba 9ZAP Problem


> All - I have tried everything I can think of and still can't solve a
> problem.  I have a Futaba 9ZAP transmitter and was using it in the PPM
> mode to fly a GWS Slow Stick, using a GWS R4P receiver.  Everything was
> fine until one day I went to fly the Slow Stick.  The aileron, elevator
> and rudder servos worked fine, but the motor would not work.  I tried
> everything I could think of, including trying an unused model in the
> 9ZAP.  Nothing worked.  Then I tried a different Futaba 9ZAP
> transmitter and everything worked fine.  Huhhhhh?  Any ideas?
>
> Ron Van Putte
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.