Futaba 9ZAP Problem

[Wayne Galligan]

I dont know Ron.... I lost too many brain cells at last years session to be able to answer that question.

WG

  ----- Original Message ----- 
  From: Ron Van Putte 
  To: discussion at nsrca.org 
  Sent: Wednesday, May 05, 2004 2:43 PM
  Subject: Re: Futaba 9ZAP Problem



  On May 5, 2004, at 12:23 PM, Wayne Galligan wrote:


    If you could wait till you get to the BudCo Pro Shop Friday evening think
    tank in Nederland I am sure there will be an answer there for you.

    Otherwise... I cant help you.


  Do you really think anything really useful will come out of the Friday evening session at the BudCo Pro Shop? I'll be there.

  Ron Van Putte


    ----- Original Message ----- 
    From: "Ron Van Putte" <vanputte at cox.net>
    To: <discussion at nsrca.org>
    Sent: Wednesday, May 05, 2004 12:15 PM
    Subject: Futaba 9ZAP Problem



      All - I have tried everything I can think of and still can't solve a
      problem. I have a Futaba 9ZAP transmitter and was using it in the PPM
      mode to fly a GWS Slow Stick, using a GWS R4P receiver. Everything was
      fine until one day I went to fly the Slow Stick. The aileron, elevator
      and rudder servos worked fine, but the motor would not work. I tried
      everything I could think of, including trying an unused model in the
      9ZAP. Nothing worked. Then I tried a different Futaba 9ZAP
      transmitter and everything worked fine. Huhhhhh? Any ideas?

      Ron Van Putte

      =====================================
      # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
      and follow the instructions.






    =====================================
    # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
    and follow the instructions.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040505/852799f2/attachment.html