Focus 2 Elevator Pushrod

[Marty King]

Scott,
 
Don Szczur has a great play by play build up on the Focus II at the following address: http://www.rcuniverse.com/forum/FOCUS_II_ARF_construction_by%2Dthe%2Dnumbers/m_1431697/tm.htm
 
He has a number of drawings and other support material along with comments from other builders. Give it a try I bet your questions will be answered.
 
Marty
NSRCA 2551
 

john tarpinian <jtarpinian at yahoo.com> wrote:
I bind the metal pushrods with rubber bands and then
insert the assembly into the fuselage so that the
ends/rubber bands are at the exit hole. I then cut the
ruber band. With a little fiddling the ends will come
through the exit holes.

John

--- Scott Pavlock wrote:
> I am having trouble with figuring out how to install
> the elevator pushrod as said in the manual on my
> Focus 2. When we bend the metal ends that go from
> the carbon fiber rod to the elevator halfs, it
> doesn't look like they will fit into the back of the
> fuse where the exit holes are. Any suggestions on
> how I go about doing this????
> 
> Thanks in advance!!!
>
_______________________________________________________________
> Scott Pavlock
> 586-295-2611
> 
> groups.msn.com/scottspatternpage
> 
> photos.yahoo.com/f3aflyer7
> 





__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs 
http://hotjobs.sweepstakes.yahoo.com/careermakeover 
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

		
---------------------------------
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040503/f5581be3/attachment.html