Focus 2 Elevator Pushrod

[john tarpinian]

I bind the metal pushrods with rubber bands and then
insert the assembly into the fuselage so that the
ends/rubber bands are at the exit hole. I then cut the
ruber band. With a little fiddling the ends will come
through the exit holes.

John

--- Scott Pavlock <F3AFlyer7 at comcast.net> wrote:
> I am having trouble with figuring out how to install
> the elevator pushrod as said in the manual on my
> Focus 2. When we bend the metal ends that go from
> the carbon fiber rod to the elevator halfs, it
> doesn't look like they will fit into the back of the
> fuse where the exit holes are. Any suggestions on
> how I go about doing this????
> 
> Thanks in advance!!!
>
_______________________________________________________________
> Scott Pavlock
> 586-295-2611
> 
> groups.msn.com/scottspatternpage
> 
> photos.yahoo.com/f3aflyer7
> 



	
		
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover 
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.