Arresti Finished

[Bob Pastorello]

Awaiting more energy and patience.  For a PARF, this has been a *LOT* of
work...

Bob Pastorello, Oklahoma
NSRCA 199, AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


----- Original Message ----- 
From: "Jerry Budd" <jbudd at QNET.COM>
To: <discussion at nsrca.org>
Sent: Saturday, March 06, 2004 6:51 PM
Subject: Re: Arresti Finished


> Bob, where's the wheel pants?   : )
>
> >All that's left is the test flight.  Crooked as an old gnarly oak,
> >weighs right at 11 lbs...has a Perry pump on the OS 1.60 now, Mac's
> >1092 @ 19"pipe, turns 8500 w/ 17 x 12N, and it's all working.
> >Throttle servo on beams has done well through about a gallon of
> >ground runs...seems fine.  Mount hasn't sagged - lock nuts on the
> >back of the well nuts inside the firewall did the trick there
> >(Thanks Ron Lockhart/Rick Wallace!)....so...
> >     Weather permitting we'll launch tomorrow.
> >
> >Here's all the pics....
>
><http://www.rcaerobats.net/Arresti/ArrestiPhotos.htm>http://www.rcaerobats.
net/Arresti/ArrestiPhotos.htm
> >
> >Bob Pastorello, Oklahoma
> >NSRCA 199, AMA 46373
> ><mailto:rcaerobob at cox.net>rcaerobob at cox.net
> ><http://www.rcaerobats.net>www.rcaerobats.net
> >
> >
>
>
> -- 
> ___________
> Jerry Budd
> mailto:jbudd at qnet.com
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#