Stainless Steel Bearings

Verne Koester verne at twmi.rr.com
Fri Jun 25 13:09:52 AKDT 2004


Anthony,
The NTN number is 6904LU. The bearing supplier closest to me wants 42.00 each. Tower sells it packaged as the O.S. 1.4 EFI replacement part for 26.00 each. Same number, same manufacturer (NTN) - go figure. All I know is they work, easily last a whole season plus and let me concentrate on flying instead of engines - the very reason I went back to 2-strokes in the first place. 

Gonna see ya at Westland?

Verne

----- Original Message ----- 
  From: Anthony Abdullah 
  To: discussion at nsrca.org 
  Sent: Friday, June 25, 2004 9:07 AM
  Subject: Re: Stainless Steel Bearings


  Does anyone know the NTN part number for the OS 140 RX SS bearing set. I work for the second largest bearing distributor in North America and could get them for 2% above cost if I had the part number. Otherwise I have to take mine out and mic it. 

  We also distribute some very cool linear motion items that, if lighter, would be great in a pattern plane. We have a SS shaft, which I suppose could be carbon fiber, that runs through a long cylinder containing ball bearings in a serpentine arrangement. It guarantees precise linear motion with almost no friction whatsoever. If the cylinder were 30 feet long, a small push would send the shaft all the way to the other end. If I were more industrious, or had the time, I would take it home and rework it to make it lighter.   

  Ron Van Putte <vanputte at cox.net> wrote:

    On Jun 25, 2004, at 4:10 AM, Jerry Budd wrote:

    > I used to carry the OS 1.40 SS bearings but I quit running the OS. 
    > That and I discovered a retailer in NY that was selling them online 
    > for less than I could purchase them for: 
    > https://www.shinyei.co.jp/AFCBearings/index.htm (I have no idea if 
    > they're any good). So I quit carrying them.

    Which bearing from this source is the correct SS bearing for the OS 
    1.40RX?

    Ron Van Putte

    >> Who carries the OS 1.40 SS bearing?
    >> Doesn't Jerry Budd carry this bearing?
    >>
    >> Wayne G.
    >
    > -- 
    > ___________
    > Jerry Budd
    > Budd Engineering
    > http://www.buddengineering.com
    > =====================================
    > # To be removed from this list, go to 
    > http://www.nsrca.org/discussionA.htm
    > and follow the instructions.
    >

    =====================================
    # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
    and follow the instructions.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040625/76252690/attachment.html


More information about the NSRCA-discussion mailing list