More Tx Springs

[Dwayne & Nancy Brown]

Back in the dark ages Carl Summers (Dallas) told me that he knew of a flier who had no centering springs of his sticks.  It may have been Zel Ritchie.  I have a Min-X galloping ghost tx that uses a single, central spring for both rudder and elevator.  If the stick is off center, say doing rolls, there is not any sensation of center in the elevator as you work it for the down and up in consecutive rolls.  It's weird.
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: NSRCA 
  Sent: Wednesday, June 16, 2004 9:55 PM
  Subject: More Tx Springs


  Well...a first for ME, guys....all these years, and even the recent "hexes" of people telling their broken spring tales...and tonight, flight one, about a minute into it....... BOING......aileron goes limp.  What a truly bizarre sensation.  It is REALLY weird to fly around with an aileron gimbal that just goes anyplace....strange on landing, too, I might add.
      But anywhoe - the real tale is WHAT broke.  JR 10X, about 4 years old....I had modified the STOCK springs when new by removing two loops, and making the correct size loop VERY carefully for the plastic tangs of the adjusters....(Tony S. is definitely correct...the size of the loop makes a difference).  Anyway - I had very carefully matched the loops, and they were fine.  Was even VERY careful to not stress the spring when I bent the new angle....then....
      Tonights' failure.....
  The LOOP broke off the *spring*.  Plastic tangs still perfect....like new.

  I was amazed.

  (Tony S. - send me a set (3) of STOCK JR springs, please!!!! )

  It was a real surprise.

  Bob Pastorello
  rcaerobob at cox.net
  www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040616/214fa71c/attachment.html