Cool Power

[Michael Ramsey]

Are you changing just the rear, or both the front and rear bearings?

Thanks, Michael Ramsey


----- Original Message -----
From: "Nat Penton" <natpenton at centurytel.net>
To: <discussion at nsrca.org>
Sent: Thursday, June 10, 2004 12:08 PM
Subject: Re: Cool Power


> Brian I think anyone not running these bearings is a dummy. I could not
get
> 30 flts with the stock bearings, nor with the high speed Boca's.   Nat
> Penton
> ----- Original Message -----
> From: "Brian Young" <b4598070 at yahoo.com>
> To: <discussion at nsrca.org>
> Sent: Thursday, June 10, 2004 9:54 AM
> Subject: Re: Cool Power
>
>
> > Nat, this is a sealed and greased bearing then right?
> > I was wondering about trying this in my Webra, is it a
> > high temp grease and seal compound?
> >
> > I figured the grease would eventually wash out but I
> > dont recall getting 300 flights on a bearing yet.
> >
> > --- Nat Penton <natpenton at centurytel.net> wrote:
> > > I'm around 300 flights on the 91FX with the sealed
> > > bearings from Boca. Don't run dry and no afterrun
> > > oil and tickled pink.Bearings still feel great. 30%
> > > nitro, good crankcase ventilation.           Nat
> > > Penton
> > >   ----- Original Message -----
> > >   From: Dave Smith
> > >   To: discussion at nsrca.org
> > >   Sent: Wednesday, June 09, 2004 3:42 PM
> > >   Subject: Cool Power
> > >
> > >
> > >   I received my first batch of Cool Power with the
> > > new label on it.
> > >   This label says in bold letters,"DO NOT USE AFTER
> > > RUN OILS".
> > >
> > >   Any comments on this??
> > >
> > >   Dave
> >
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Friends.  Fun.  Try the all-new Yahoo! Messenger.
> > http://messenger.yahoo.com/
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.