Cool Power

[jghughes]

I don't use after run oil, just run out the fuel. Every time I pull one apart for any reason, everything is coated with oil. Remember, our fuel is 20% oil, 
  ----- Original Message ----- 
  From: Rcmaster199 at aol.com 
  To: discussion at nsrca.org 
  Sent: Wednesday, June 09, 2004 6:49 PM
  Subject: Re: Cool Power


  Dave, I heard from a friend that his bearing rusted anyway after using this "new" fuel.  He ran the fuel out of it completely after flying and did not use after run oil. And that was after only two week lay-up.

  I suggest that you continue to follow the procedure that works for you. For me, my after run procedure is simple: run it dry and then squirt 15 drops of castor and turn it over 20 times to coat. I have used Klotz also with good results. Other oils may work better but this works for me.

  Matt K



    Subj:Cool Power 
    Date:6/9/2004 5:34:16 PM Eastern Daylight Time
    From:davidsmith at ns.sympatico.ca
    Reply-to:discussion at nsrca.org
    To:discussion at nsrca.org
    Sent from the Internet 



    I received my first batch of Cool Power with the new label on it.
    This label says in bold letters,"DO NOT USE AFTER RUN OILS".

    Any comments on this??

    Dave



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040609/417fffae/attachment.html