More Webra problems

[RC Steve Sterling]

Hey Gordon, from your first post I thought I might have found that spare
engine I have been looking for.

Let me know if you are going to dump it.

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Gordon Anderson
Sent: Saturday, July 31, 2004 6:01 PM
To: discussion at nsrca.org
Subject: RE: More Webra problems


Jerry,

Thanks for the offer to tune it up for me! I have been getting some
additional
ideas and I will likely try a few more things, after I cool down! I'll have
to
wait till the season ends because we have a bunch of contests in the next
month.

--Gordon

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Jerry Budd
Sent: Saturday, July 31, 2004 2:54 PM
To: discussion at nsrca.org
Subject: Re: More Webra problems

>I thought I dad the Webra problems solved but this turns out not to be
>the case. Today I had 2 more dead stick landings. In over a dozen
>flights I have had only 3 power on landings. I'm done with this thing.
>
>I'm interested in recommendations for a replacement 2 stroke. I can't
>seem to find a OS 1.40RX. I have had good luck with the OS 1.60 but I
>don't want to hack up the fuse for the wrap around header. Anyone have
>feedback on the Mintor?
>
>If you are thinking about a webra, DON'T
>
>--Gordon


Hi Gordon,

Sorry to hear you're having continuing problems with your Webra motor, I
know
first hand how frustrating it can be trying to diagnose powerplant issues.
And
if the motor is defective, the only solution is to send it back, or repair
it
yourself (which can be  inconvenient and/or expensive).

I've been fortunate in that I've had very few problems with the Webra's I've
had
(and I've pushed mine harder than anybody).  I'm not saying the Webra motors
are
perfect, but set up properly they can work extremely well.

And to be honest, one can make the same negative comments about ANY of the
motors in use today (even the electrics).  YS, OS, Webra, 3M, Hacker - they
all
have their quirks, good points, and bad points.

Is there someone in your area who has a similar setup that can help you
resolve
this?  If not, I'd be happy to take a look at your motor (even fly it in my
E=MC3 if needed) to see if I can help sort it out.

Thx, Jerry

(BTW - I don't get paid to do this.  I'm sponsored only by my wife and our
two
dogs)
--
___________
Jerry Budd
mailto:jbudd at qnet.com
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.