Creative Nose Ring Mounting?

Rcmaster199 at aol.com Rcmaster199 at aol.com
Sat Jul 31 07:19:58 AKDT 2004


What I did a while back was to drill the firewall corners and install 3/16" 
carbon tubing, similar to a Hanson arrangement. The tubing essentially formed 
the four legs of chair, extending forward and coming together into a seat. The 
seat of the chair formed the nose ring. The nose ring was made from rubber 
sheet. Worked well enough but wasn't easily removable. 

Eventually I opted to remove all that and mount the cowling permanently 
instead. I opted for a hatch on the bottom of the cowling for engine access and 
that assembly worked better and was lighter. Good l,uck Bob

MattK
From: Bob Pastorello 
To: NSRCA 
Sent: Friday, July 30, 2004 11:03 PM
Subject: Creative Nose Ring Mounting?


Hoping there's someone out here with a creative solution to a pesky 
problem.... on my own rotational mount, with the OS 1.60, I think I need to install a 
nose ring....Arresti is a "cowling" nose, so can't go there....don't want to 
replace cowling with built up wooden assy.
    Any ideas for making some kind of tripod/post affair that would attach to 
the firewall ( I have area of firewall around the mount that is accessible on 
all sides) to mount the nose ring to???

Any ideas or solutions would be much appreciated!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040731/7adda9dd/attachment.html


More information about the NSRCA-discussion mailing list