OS 160FX and pump question

[Alan Hewson]

I knew there was something I forgot to do......I forgot to tell Mike to remove the back plate FIRST
Thanks Bob

Alan

  ----- Original Message ----- 
  From: Bob Pastorello 
  To: discussion at nsrca.org 
  Sent: Friday, July 16, 2004 10:40 PM
  Subject: Re: OS 160FX and pump question


  Please tell us you did that with the backplate REMOVED....

  Bob Pastorello
  rcaerobob at cox.net
  www.rcaerobats.net


    ----- Original Message ----- 
    From: Alan Hewson 
    To: discussion at nsrca.org 
    Sent: Friday, July 16, 2004 9:34 PM
    Subject: Re: OS 160FX and pump question


    I just posted a picture of my pressure tap on my OS160FX.
    It is just a pressure tap from the hobby shop......4-40 tap size.....drill with appropriate tap drill size first. Tap the hole, clean up the burrs, a drop of Loctite, and snug it in.
    Click here:
    http://www.countryworkshop.ca/planes/os160fx.htm

    Alan Hewson



      ----- Original Message ----- 
      From: Mike Hester 
      To: discussion at nsrca.org 
      Sent: Friday, July 16, 2004 4:13 PM
      Subject: OS 160FX and pump question


      Ok, maybe I'm missing something obvious here. But, I have an OS 160 FX and a Perry V30 pressure type pump. Where in the heck do you tap this thing for pressure? There's usually a boss in the center of the back plate, or the back plate is smooth, or something. This engine has raised egdes that wouldn't allow for very easy drilling and tapping. 

      Any suggestions from those that have done this?

      thanks,
      -Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040717/1b33e073/attachment.html