Kavan starter & Miller starter cone, correct part # KSG-201

[Dennis Cone]

Also try Hobby Lobby. Here is the link. They have the silicone insert.

http://www.hobby-lobby.com/kavan.htm


Dennis Cone


-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On
Behalf Of David Harmon
Sent: Tuesday, July 13, 2004 4:54 PM
To: discussion at nsrca.org
Subject: RE: Kavan starter & Miller starter cone, correct part # KSG-201

Ihncheol.....great!

Another small mystery solved and another part # addition to the
archives!

Thanks for posting the correct part #.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]comcast[dot]net
Torrance, Ca.

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ihncheol Park
Sent: Tuesday, July 13, 2004 4:18 PM
To: discussion at nsrca.org
Subject: RE: Kavan starter & Miller starter cone, correct part # KSG-201

David,

thank you for the E-mail with Miller's contact info.
I called today and ordered directly from them.

the correct part number is KSG-201.  "K" stands for Kavan.  Somehow, I
also got the incorrect part number as SG-201.
The guys at Miller are great.

Thank you again.

Ihncheol Park

David Harmon <K6XYZ at comcast.net> wrote:
I bought mine from them at a trade show several years ago so I don't
really know what their part # is.
Apparently, Miller R/C does not have a web site but here is their info.
I guess the only way for sure is to call them.

Miller R C
159 Greene St
Kenwood, CA 95452-9001
(707) 833-5905

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]comcast[dot]net
Torrance, Ca.

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of dwbrown285 at netscape.net
Sent: Tuesday, July 13, 2004 11:55 AM
To: discussion at nsrca.org
Subject: RE: Kavan starter & Miller starter cone

I had recently ordered the SG201 stock number based on information in an
earlier discussion list E-mail. Mine is also too small and only has
three slits. Is there a different part number we should be looking for?

David Brown

"David Harmon" wrote:

Ihncheol.....They must have put the wrong cone in the package as my
Miller has all 6 slots and is a tight push fit into the Kavan starter. I
would return it and ask them for the correct part for the Kavan.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]comcast[dot]net
Torrance, Ca.

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ihncheol Park
Sent: Tuesday, July 13, 2004 12:01 AM
To: NSRCA
Subject: Kavan starter & Miller starter cone

Hi, All,

Well, I know everyone's busy for the Nat.  Good luck to you all~~

Anyway, I just got a Miller starter cone SG201 (sky grip) to use on my
Kavan
starter.
Funny thing is that the blue cone is about 2.5mm smaller in diameter
with
only 3 slots. I can make the extra 3 slots, but what should I do with
the
smaller diameter.

How do you people use it?
Thanks,


Ihncheol Park



__________________________________________________________________
Switch to the New Netscape Internet Service.
As low as $9.95 a month -- Sign up today at
http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp
=====================================
# To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
and follow the instructions.


====================================# To be removed from this list, go
to http://www.nsrca.org/discussionA.htm
and follow the instructions.

============# To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.