Asano Header Parts?

[NSRCA Canada-West]

IhnCheol

That's a great picture of the parts... thanks. I'll let the "translator" do it's thing and hopefully I can get these items.

Your explanation of the parts is appreciated.

Dave


  ----- Original Message ----- 
  From: IhnCheol Park 
  To: discussion at nsrca.org 
  Sent: Wednesday, January 28, 2004 7:49 PM
  Subject: Re: Asano Header Parts?


  Dave,

  I forgot to add another link for translation.
  I looked at the picture again
  http://www.h3.dion.ne.jp/~cac3619/manifold/ys4c140dj_m.htm

  The picture has two black dual threaded shafts.  I don't remember the head 
  screw diameter for YS 140s (my YS 140L is still in the box since September). 
    The lower thread is same size as the head screws.  The top (thicker) 
  portion is probably at least 1 or 2 mm larger thread and locks into the 
  socket head aluminum part (threaded inside).  Then, there is a small washer 
  (under the socket head).  Finally the allen screw (not sure if this has same 
  thread as the top portion of the black threaded part) hold the header to the 
  aluminum socket head part.

  For translation, below site is good and free.
  http://babelfish.altavista.com/

  Hope you get the parts through Quique Somenzini.

  Ihncheol Park

  >From: NSRCA Canada-West <nsrcawestdistrict at shaw.ca>
  >Reply-To: discussion at nsrca.org
  >To: discussion at nsrca.org
  >Subject: Re: Asano Header Parts?
  >Date: Wed, 28 Jan 2004 15:00:46 -0800
  >
  >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040128/30e2e1ea/attachment.html