PL Prod Lazulite CG

Wayne Galligan wgalligan at goodsonacura.com
Wed Jan 28 09:44:58 AKST 2004


For most men.... RESISTANCE would by futile with # 7.

WG

  ----- Original Message ----- 
  From: Henderson,Eric 
  To: discussion at nsrca.org 
  Sent: Wednesday, January 28, 2004 12:38 PM
  Subject: RE: PL Prod Lazulite CG


  or "By your command!"

  E
  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Dean Pappas
  Sent: Wednesday, January 28, 2004 1:21 PM
  To: discussion at nsrca.org
  Subject: RE: PL Prod Lazulite CG


  That's OK ... as you know, "resistance is futile".
  Dean
    -----Original Message-----
    From: Atwood, Mark [mailto:atwoodm at paragon-inc.com]
    Sent: Wednesday, January 28, 2004 1:14 PM
    To: discussion at nsrca.org
    Subject: RE: PL Prod Lazulite CG


    Until yesterday it appears to have been New Hampshire.

    Sorry...couldn't resist.

    -M
    -----Original Message-----
    From: Dean Pappas [mailto:d.pappas at kodeos.com]
    Sent: Wednesday, January 28, 2004 12:53 PM
    To: discussion at nsrca.org
    Subject: RE: PL Prod Lazulite CG


    So where is the center of levity?
    Just being silly!
    Regards to All,
        Dean P.
      -----Original Message-----
      From: Woodward James R Civ 412 TW/DRP [mailto:James.Woodward2 at edwards.af.mil]
      Sent: Wednesday, January 28, 2004 11:54 AM
      To: discussion at nsrca.org
      Subject: PL Prod Lazulite CG


      Hi All,

      If someone knows the CG location of the PL Prod Lazulite, I would like to know it.  I tried to use a translator to decipher the instruction set.  However, if I'm correct, the French word for "wing-tube" (Cle') is translated to English as "Key."  Thus, the CG would be 20 mm aft of the "Axis of the Key."  The other CG reference seems to be from the wing Leading Edge as 190 MM.  However, the translation is "behind attack edge."  Either way, the 20 mm behind the center of the wing tube, or 190 from the LE of the wing seam to be close (due to sanding, they do differ a little with the 20 mm measurement resulting in a slightly more aft CG location.).



      Of course, a simple diagram with any of these numbers would have solved the problem.  However, the only reference to "centre de gravite" is on a picture (taken from an angle) showing the stab/wing aligned with masking tape from the stab tips to the wing tips.  There are no "CG" mark locations on any of the photos.  *Note:  "centre de gravite" translates directly to "center of seriousness."



      Thanks!!

      Jim W.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040128/2ec3e700/attachment.html


More information about the NSRCA-discussion mailing list