PL Prod Lazulite CG

[jim ivey]

Jim
Fly it first and then put the cg where you want it.
Good luck.

Been long time hope all is well.

Jim Ivey


jivey61 at msn.com





>From: Woodward James R Civ 412 TW/DRP <James.Woodward2 at edwards.af.mil>
>Reply-To: discussion at nsrca.org
>To: discussion at nsrca.org
>Subject: PL Prod Lazulite CG
>Date: Wed, 28 Jan 2004 08:54:00 -0800
>
>Hi All,
>
>If someone knows the CG location of the PL Prod Lazulite, I would like to
>know it.  I tried to use a translator to decipher the instruction set.
>However, if I'm correct, the French word for "wing-tube" (Cle') is
>translated to English as "Key."  Thus, the CG would be 20 mm aft of the
>"Axis of the Key."  The other CG reference seems to be from the wing 
>Leading
>Edge as 190 MM.  However, the translation is "behind attack edge."  Either
>way, the 20 mm behind the center of the wing tube, or 190 from the LE of 
>the
>wing seam to be close (due to sanding, they do differ a little with the 20
>mm measurement resulting in a slightly more aft CG location.).
>
>
>
>Of course, a simple diagram with any of these numbers would have solved the
>problem.  However, the only reference to "centre de gravite" is on a 
>picture
>(taken from an angle) showing the stab/wing aligned with masking tape from
>the stab tips to the wing tips.  There are no "CG" mark locations on any of
>the photos.  *Note:  "centre de gravite" translates directly to "center of
>seriousness."
>
>
>
>Thanks!!
>
>Jim W.
>
>
>
>
>

_________________________________________________________________
Check out the coupons and bargains on MSN Offers! 
http://shopping.msn.com/softcontent/softcontent.aspx?scmId=1418

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#