Kevlar question

[ronlock]

I prefer to secure the vinyl coated kevlar to a 4-40 eye-bolt that goes into
a clevis.
To secure it,  wrap about 3 turns thru the eye-bolt, tie a knot, add a drop
of thick CA.
No failures.

Ron Lockhart

----- Original Message ----- 
From: "John Crozier" <sjcrozier at comcast.net>
To: "nsrca discussion" <discussion at nsrca.org>
Sent: Saturday, January 24, 2004 7:14 PM
Subject: Kevlar question


> I plan to use Kevlar for my pull-pull rudder.
> Is the procedure to double the line back through the collar, crimp it,
and
> hit it with a drop of thin CA?
> Also, I'm concerned about the loop wearing where it goes through the servo
> arm hole.
> Feedback appreciated.
> Thanx..croz
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#