New Throttle - WAS - Tonight's Dumb Idea...

[Bob]

Right,

I didn't notice it. 


Best Regards

Roberto Bracchi - Modelcompositi
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: discussion at nsrca.org 
  Sent: Saturday, February 21, 2004 4:31 PM
  Subject: Re: New Throttle - WAS - Tonight's Dumb Idea...


  What looks to be the "firewall" is actually the rear plate of the motor mount.  THAT plate is soft-mounted to the real firewall using the rubber washers/well nut method that Lee Davis shows on the Piedmont website, and many are using.  Mine is an adaptation, intended to move the anchor points for the "soft mount" to the extreme edges.  Look here, Roberto
  http://www.rcaerobats.net/Arresti/ArrestiPhotos.htm

  Toward the bottom are detail photos of the ply plate, and how it is isolated from the actual firewall.

  Bob Pastorello, Oklahoma
  NSRCA 199, AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net


    ----- Original Message ----- 
    From: Bob 
    To: discussion at nsrca.org 
    Sent: Saturday, February 21, 2004 8:57 AM
    Subject: Re: New Throttle - WAS - Tonight's Dumb Idea...


    Hi Bob,

    I saw the pictures of your servo arrangement.
    My opinion is that such installation is not so good, because the servo is not connected to the engine DIRECTLY, but to the engine mount.
    Being a fixed installation (not soft mounted), there is a relative motion among the engine (that wants to rotate) and the engine mount (that is secured firmly to the firewall). In this way you cannot say that the servo is connected to the engine.
    I don't know if this way is safe or not, but of course it is WAY less safe and precise than the servo connected to a soft mounted engine.
    I supposed that you was referring to an Hyde mounted engine. On your installation, my advices are not appliable.

    Best Regards

    Roberto Bracchi - Modelcompositi




    ----- Original Message ----- 
      From: Bob Pastorello 
      To: discussion at nsrca.org 
      Sent: Saturday, February 21, 2004 4:00 AM
      Subject: New Throttle - WAS - Tonight's Dumb Idea...


      Haven't run it yet, da*# thing may fall apart...but here's a few pics of what I'm trying first.
      http://www.rcaerobats.net/Arresti/Throttle/ThrottleServo.htm

      Bob Pastorello, Oklahoma
      NSRCA 199, AMA 46373
      rcaerobob at cox.net
      www.rcaerobats.net


        ----- Original Message ----- 
        From: Bob Pastorello 
        To: NSRCA 
        Sent: Monday, February 16, 2004 6:19 PM
        Subject: Tonight's Dumb Idea...


        Okay - since you've opened it, read on :)

        Thinking of mounting an adequately-sized micro/mini servo directly to the beams of a motor mount to control my OS 1.60 on my experimental Arresti III....

        Anyone ever done this?

        (You may now stop laughing, and click on "Reply")

        Bob Pastorello, Oklahoma
        NSRCA 199, AMA 46373
        rcaerobob at cox.net
        www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040221/6e1a3bf7/attachment.html