Airtronics aluminum servo arms

[Anthony Abdullah]

The JR aluminum arm fit to the metal output shaft Airtronics servo is very good, but for some reason the fit to the plastic output gear is just a little sloppy. It should be a relatively tight fit, but it will slide on and off pretty easily.

"Atwood, Mark" <atwoodm at paragon-inc.com> wrote:Hey Anthony,
 
I'm afraid then that you wouldn't be pleased with the fit of the JR Aluminum wheels on JR servo's either.  The splines are virtually identical I beleive.  I've used both wheels interchangably for a while with good success.  I don't think you'll find anyone making a dedicated wheel for Airtronics...and if they did, they'd label it for Airtronics/JR anyway...lol
 
-Mark
-----Original Message-----
From: Anthony Abdullah [mailto:aabdu at sbcglobal.net]
Sent: Monday, February 09, 2004 8:46 AM
To: discussion at nsrca.org
Subject: Airtronics aluminum servo arms



Does anyone know of a source of aluminum servo arms made specifically for Airtronics servos? The best I could find were the heavy duty plastic with aluminum hub reinforcement, and an RC car set that is aluminum, but with plastic inserts to fit different brands of servos.

I have already called Central, Radio South, Tower, and Airtronics. I am not pleased with the fit of the JR aluminum wheels to Airtronics.

TIA

Anthony


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040209/3c466876/attachment.html