YS 160DZ

[Derek Koopowitz]

Thanks Troy.  I agree with the hemostat use... I'm not a fan.

  _____  

From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Troy A. Newman
Sent: Wednesday, December 22, 2004 6:51 PM
To: discussion at nsrca.org
Subject: Re: YS 160DZ


Derek,
 
APC 17-12 Standard works great 8600-8800 on CP 30% heli
Tank size Tettra 20oz.
 
Same fuel consumption as the 140DZ. I get about 11-12mins of sequence flying
land with a little fuel. This is about the same I got on the 140's Nothing
to notice different.
 
Tank layout I will send you a picture of what I do to isolate the tank from
the motor when its not running. I don't use the Hemostats. They will pinch
the line and crush it. After time they will cause the line to rupture or
split at the point where the hemos are used.
 
Troy

----- Original Message ----- 
From: Derek Koopowitz <mailto:derekkoopowitz at earthlink.net>  
To: NSRCA List <mailto:discussion at nsrca.org>  
Sent: Wednesday, December 22, 2004 7:45 PM
Subject: YS 160DZ


I just got one of these motors and I'm looking for info. 

1.  What prop is best? 
2.  What size fuel tank?  I know the 140DZ was a thirsty beast so I'm
assuming that the 160 is the same, or perhaps they've fine tuned the
thirstyness.

3.  Instead of the using the angled fuel lines that come out the fuse and
are pinched off with a set of haemostats. what other ways can one use to
pinch off the fuel line to prevent flooding?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041223/dc38f11b/attachment.html