Excelleron and Tiger shark 120

[Randy]

MessageCool - great idea
Randy
  ----- Original Message ----- 
  From: Fletcher, Richard 
  To: 'discussion at nsrca.org' 
  Sent: Wednesday, December 22, 2004 4:14 PM
  Subject: RE: Excelleron and Tiger shark 120


  Go to Ace hardware and buy a few jam nut. They have them in the OS 160 size, I ran into this problem in the summer. The jam nuts are very thin.




  Thanks, Rich 






    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On Behalf Of Randy
    Sent: Wednesday, December 22, 2004 4:11 PM
    To: discussion at nsrca.org
    Subject: Excelleron and Tiger shark 120


    Well the Tiger Shark 1.20 came today.  I had pipes in the apartment freeze during the cold snap; so I am home watching the plumber and installing the tiger shark 120.  This engine looks great and has the same bolt pattern as the OS91FX I took out.  Looks like the engine was made for the plane.

    The 15X8APC I got for break in is the smallest size prop they recommend, so probably get a bigger prop.  Uses the same prop nuts as the OS160FX.  But putting a spinner on it is going to interesting. I only see three threads showing for a second prop nut/ spinner adapter to use.  What do you do for that?


    Randy 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041222/9e2c7663/attachment.html