Excelleron and Tiger shark 120

[Fletcher, Richard]

Go to Ace hardware and buy a few jam nut. They have them in the OS 160 size,
I ran into this problem in the summer. The jam nuts are very thin.
 
 


Thanks, Rich 





-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Randy
Sent: Wednesday, December 22, 2004 4:11 PM
To: discussion at nsrca.org
Subject: Excelleron and Tiger shark 120


Well the Tiger Shark 1.20 came today.  I had pipes in the apartment freeze
during the cold snap; so I am home watching the plumber and installing the
tiger shark 120.  This engine looks great and has the same bolt pattern as
the OS91FX I took out.  Looks like the engine was made for the plane.
 
The 15X8APC I got for break in is the smallest size prop they recommend, so
probably get a bigger prop.  Uses the same prop nuts as the OS160FX.  But
putting a spinner on it is going to interesting. I only see three threads
showing for a second prop nut/ spinner adapter to use.  What do you do for
that?
 
 
Randy 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041222/84ad0413/attachment.html