Excelleron ST'd

Terry Terrenoire amad2terry at juno.com
Mon Dec 20 03:08:30 AKST 2004


I ordered my Christmas Excelleron last weekend, so I should get it by the
25th, so my wife can wrap it and really surprise me next Saturday
morning. Debating on which engine to put in it. I have both, a YS 120NC,
and the YS .91. I know, I know, you can never have TOO much power, so go
with the 120!! Still have not convinced myself. If anyone out there is
flying one now, let us know what weight to expect. That may make my
decision for me. Over 7 1/2 LBS, and I'll definately go with the 120.

Terry T.


On Sun, 19 Dec 2004 12:23:19 -0500 "Randy" <randy10926 at comcast.net>
writes:
Any more about the ST2300.  Looked at RC Universe, but how does it fly? 
Any problems with the CG.

My OS91FX is back to a stock carb but have gone with the OS update for
the rear needle valve assembly.  It is the rear needle vavle assembly for
the 65LA.  Mounted it on the fire wall.  Put the Utlra thrust muffle on
it.  Seems to have picked at lot of RPMs.  You open the needle valve a
whole turn when changing from the stock to the ultra thurst muffler. 
Only test runs on the apartment patio and man it is really LOUD.  May be
too load to use in pattern.

Anyway, thinking of a belated Christmas gift to myself.  So what would be
better on an Excelleron90 -  Tiger Shark 120, Magnum 120AR, thunder tiger
120, Webra 120, or Super Tigre 2300?

Randy
----- Original Message ----- 
From: Bob Pastorello 
To: NSRCA 
Sent: Saturday, December 18, 2004 2:38 PM
Subject: Excelleron ST'd


Here's the thread on RCU with my latest efforts.  Have the ST2300
installed, broken in, and it is wonderful!!  Can't wait to fly her.  It
all fit as if it was meant to be there!!!  Obviously, this is truly
outstanding power for this airframe.

http://www.rcuniverse.com/forum/m_2341036/anchors_2445489/mpage_5/key_/an
chor/tm.htm#2445489

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041220/8ddf2481/attachment.html


More information about the NSRCA-discussion mailing list