Excelleron ST'd

[Randy]

Well - Bob tried the Tiger Shark 91,  I ordered the Tiger Shark 120 for my Excelleron.  Hopefully I will be able to break it in over one of the up coming long weekends.

Randy
  ----- Original Message ----- 
  From: Bob Pastorello 
  To: discussion at nsrca.org 
  Sent: Sunday, December 19, 2004 8:06 PM
  Subject: Re: Excelleron ST'd


  Well, I think any of those you mentioned would work quite well.  Depends on what you like, I suppose.  Weights are about the same, power probably pretty close (except the ST2300 is probably got the edge there; no substitute for cubes).

  I don't think any of 'em would be a problem.

  Bob Pastorello
  NSRCA 199  AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net


    ----- Original Message ----- 
    From: Randy 
    To: discussion at nsrca.org 
    Sent: Sunday, December 19, 2004 11:23 AM
    Subject: Re: Excelleron ST'd


    Any more about the ST2300.  Looked at RC Universe, but how does it fly?  Any problems with the CG.

    My OS91FX is back to a stock carb but have gone with the OS update for the rear needle valve assembly.  It is the rear needle vavle assembly for the 65LA.  Mounted it on the fire wall.  Put the Utlra thrust muffle on it.  Seems to have picked at lot of RPMs.  You open the needle valve a whole turn when changing from the stock to the ultra thurst muffler.  Only test runs on the apartment patio and man it is really LOUD.  May be too load to use in pattern.

    Anyway, thinking of a belated Christmas gift to myself.  So what would be better on an Excelleron90 -  Tiger Shark 120, Magnum 120AR, thunder tiger 120, Webra 120, or Super Tigre 2300?

    Randy
      ----- Original Message ----- 
      From: Bob Pastorello 
      To: NSRCA 
      Sent: Saturday, December 18, 2004 2:38 PM
      Subject: Excelleron ST'd


      Here's the thread on RCU with my latest efforts.  Have the ST2300 installed, broken in, and it is wonderful!!  Can't wait to fly her.  It all fit as if it was meant to be there!!!  Obviously, this is truly outstanding power for this airframe.

      http://www.rcuniverse.com/forum/m_2341036/anchors_2445489/mpage_5/key_/anchor/tm.htm#2445489

      Bob Pastorello
      NSRCA 199  AMA 46373
      rcaerobob at cox.net
      www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041220/6592a459/attachment.html