OS 160FX setup

[randy10926 at comcast.net]

Just wondering -

Why run the pressure tap from the pipe instead of the backplate?  Also I run a greeve pipe which has no visible high point that I notice.

Randy

-------------- Original message -------------- 


----- Original Message ----- 
From: Karl G. Mueller 
To: discussion at nsrca.org 
Sent: Thursday, December 02, 2004 11:10 AM
Subject: Re: OS 160FX setup


Wayne,

I haven't used a pump or regulator since I got the first O.S. 160FX.
Two seasons on the first with the original bearing in a heavy 2M Star.
4oz. header tank behind fire wall and 16oz. tank just in front of wing tube.
Pipe pressure from high point of pipe into main tank. No need for any
pump or regulator. Consistent runs and excess power every flight with 
unlimited vertical. 
16.5 X 12 APC, Fourstroke Y.S. plug, Mac's #1090 pipe with small diffuser-
aftermuffler added to stinger. You can guess who's header. Very quiet setup.
Will run on any fuel from 15-30%  without any noticeable change in power.

Karl G. Mueller
kgamueller at rogers.com

----- Original Message ----- 
From: Wayne Galligan 
To: discussion at nsrca.org 
Sent: Thursday, December 02, 2004 10:38 AM
Subject: Re: OS 160FX setup


On the ST2300 if you use the Perry pump you also need to use the Perry carb.  I have one now that I am still running and once its set I had to barely make any adjustments over the whole season.  Putting it in a Funtana 90 right now...should be a blast!!

Art Waggner flies FAI and uses the OS 1.60 quite successfully with no pump.   He runs the tank behind the firewall and uses a bladder tank and runs muffler pressure.

Wayne Galligan.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041202/474f770f/attachment.html