150cc engine header question

[Bill Krueger]

A proper welding job will be plenty strong.

flierbk
----- Original Message ----- 
From: "Fletcher, Richard" <Richard.Fletcher at gs.com>
To: <mini-iac at yahoogroups.com>
Cc: <discussion at nsrca.org>
Sent: Friday, August 27, 2004 9:31 AM
Subject: 150cc engine header question


> Guys,
>
>     I have a brand new set of aluminum headers for my 3W 150 that I do not
> need. A buddy has a DA 150 and could use them but the flanges must be cut
> off and welded back on at the proper angle since the DA flanges are 90
> degrees to the header pipes and the 3W's flanges are at something like a
45
> degree angle. If the flanges are cut off and helix arced back on will the
> headers have enough strength, or will they not last and break? Also, if
> anyone on the list does heli arc welding or knows where I can send, them
> please let me know.
>
>
>
> Thanks, Rich
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.