NMP 7.4v 2Amp Battery Packs

[Dieter Rozek]

Thanks for all the info.  My next question was going to be what voltage 
regulator are you guys using as I haven't selected one yet.  Now that 
you have recommended the Maxx Product I'll probably go with that.
Thanks again.

Dieter
On Wednesday, August 25, 2004, at 06:17 AM, mike mueller wrote:

> Dieter I use a similar pack (Berns) in my Tempatation with about the 
> same servo's and it's better than good. As far as the charger goes I 
> tend to stik to the deticated charger lik the NMP but I have used my 
> Triton on it and it works fine. I think you will be pleased with the 
> system. What regulator are you using on the system. I have found the 
> Maxx Prod. 10Amp to be very good. Mike
>
> Dieter Rozek <rozekd at earthlink.net> wrote:
>
> I just purchase these battery packs and according to the included
> instructions is mentions to "Only use NMP's Lithium charger to charge
> these packs." I was wondering if anyone might know why this would be
> the case. Shouldn't any Li battery charger work? I already have a
> Kokam Li battery charger which allows me to charge at various rates.
> Is there a legitimate reason why I should buy their charger or should
> any Li charger work? Also, I was surprised at the diminutive size of
> the pack. Does this pack have enough juice to power 3x JR9411, 1x3412
> and 1x8411 in a Temptation? At 2A I would assume that this would be
> more than plenty? I would be interested in hearing anyone's experience
> with these packs.
>
> Thanks
>
> DIeter
>
> =====================================
> # To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
<image.tiff>
>
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1835 bytes
Desc: not available
Url : http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040825/3226ed1a/attachment.bin