NMP 7.4v 2Amp Battery Packs

[mike mueller]

Dieter I use a similar pack (Berns) in my Tempatation with about the same servo's and it's better than good. As far as the charger goes I tend to stik to the deticated charger lik the NMP but I have used my Triton on it and it works fine. I think you will be pleased with the system. What regulator are you using on the system. I have found the Maxx Prod. 10Amp to be very good. Mike

Dieter Rozek <rozekd at earthlink.net> wrote:I just purchase these battery packs and according to the included 
instructions is mentions to "Only use NMP's Lithium charger to charge 
these packs." I was wondering if anyone might know why this would be 
the case. Shouldn't any Li battery charger work? I already have a 
Kokam Li battery charger which allows me to charge at various rates. 
Is there a legitimate reason why I should buy their charger or should 
any Li charger work? Also, I was surprised at the diminutive size of 
the pack. Does this pack have enough juice to power 3x JR9411, 1x3412 
and 1x8411 in a Temptation? At 2A I would assume that this would be 
more than plenty? I would be interested in hearing anyone's experience 
with these packs.

Thanks

DIeter

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



		
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040825/f666ddf7/attachment.html