Es pipe

[Bob Pastorello]

This is a great tip for several kinds of things, Buddy!!! Thanks!

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: BUDDYonRC at aol.com 
  To: discussion at nsrca.org 
  Sent: Saturday, August 14, 2004 8:16 AM
  Subject: Re: Es pipe


  Jim and others having this problem!
  Go to an electrical supply house and buy a roll of 3M Scotch Self-Fusing Silicone Rubber Electrical Tape it is Class "H" Insulation and comes in a 1" x 30 foot roll this is a high temp.350F + self fusing inorganic silicone rubber material put a couple of wraps on your pipe then tie it down with your tie wrap with fuel tubing threaded over it, problem solved. I have used this set up for several years and hundreds of flight's with no problems. The tape is gray colored with a clear peel off, it will not stick to your pipe it will only stick to itself, I also use this around the front housing of my YS-140L to tighten up the nose ring, works well there to.   
  Buddy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040814/28061af3/attachment.html