Es pipe

[BUDDYonRC at aol.com]

Jim and others having this problem!
Go to an electrical supply house and buy a roll of 3M Scotch  Self-Fusing 
Silicone Rubber Electrical Tape it is Class "H" Insulation and  comes in a 1" x 
30 foot roll this is a high temp.350F + self fusing  inorganic silicone rubber 
material put a couple of wraps on your pipe then tie  it down with your tie 
wrap with fuel tubing threaded over it, problem solved. I  have used this set up 
for several years and hundreds of flight's with no  problems. The tape is 
gray colored with a clear peel off, it will not stick to  your pipe it will only 
stick to itself, I also use this around the front housing  of my YS-140L to 
tighten up the nose ring, works well there  to.   
Buddy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040814/ab4b166f/attachment.html