Perry regultor VP30

[Alan Hewson]

I am using the same pump. The drawing on the instruction sheet did not
describe a bypass line.
I looked on their website and it DID say to use a bypass line.
Mine is hooked up without a bypass.....works well.
Alan Hewson



----- Original Message ----- 
From: "Amram Private" <amram at leshed.com>
To: <discussion at nsrca.org>
Sent: Tuesday, August 10, 2004 11:48 AM
Subject: Perry regultor VP30


> Hello all
> I am using a Perry VP30 Fuel regulator on my Moki 1.35 engine.
> I have seen a recommendation to add a T connector on the pipe running
> from the back plate nipple to the regulator and
> One leg of the T connector to run a pipe to an input of a one-way fuel
> valve and add a pipe from the output of the one-way fuel valve to the
> fuel tank.
> The claim was that this will allow fuel overflow to be returned to the
> fuel tank.
>
> Does anyone is familiar with such configuration?
>
> Thanks
> Amram
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.