OS 1.60 Setup

[Bob Pastorello]

I don't run any N props on the 1.60.  It has too much poop and will over-rev (noise)...the 12 Std is what I've been running as my "standard" comparison prop.
    The 4 blader is the 15.5 x 12 ...good catch!

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: JonLowe at aol.com 
  To: discussion at nsrca.org 
  Sent: Tuesday, August 03, 2004 7:34 PM
  Subject: Re: OS 1.60 Setup


  In a message dated 8/3/2004 7:04:15 PM Central Daylight Time, rcaerobob at cox.net writes:
    Two things on my list for this weekend at Lubbock....the 17 x 13, and the 4 blader...I'll update.  Everyone I've talked to says the 13 is pretty sweet!!  Anybody run one?
  Ok, ANOTHER question; when you ran a 17x12 was it a 17x12N or just 17x12?  And when you try the 17x13, which will it be?  According to APC, they have both "N" and no "N" in both sizes.  I've been running the 17x12, no "N".

  Also, on the 4 blade, you said 15x12, but they (APC) only show a 15.5x12,  a 14.5x12, and a 15x11 unless I'm missing something.  Was the 15x12 another repitch/cutdown, or?

  Jon Lowe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040803/e63aa58d/attachment.html