webra prop

[Eddie Batchelor]

Mark
I got a used (bully) 120 from Lance. He sold me a 16x10 for it. I went 4-c
route on the Explorer instead, so haven't treid it.
Eddie

  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On
Behalf Of Mark Hunt
  Sent: Friday, April 30, 2004 7:14 PM
  To: discussion at nsrca.org
  Subject: Re: webra prop


  Earl,

  Thanks for the info.

  Mark
    ----- Original Message -----
    From: Earl Vincent
    To: discussion at nsrca.org
    Sent: Friday, April 30, 2004 6:30 PM
    Subject: Re: webra prop


    Just had that setup on a Quest, I ran a 16x8 and a 15x10 both turning
approx 8600 on the ground. you do not want to load that motor much lower
than 8500 it is not a long stroke engine like the 145 but will produce
decent power in the 8500-9000 range, I have a pumped 120 on my Goldberg
Ultimate with a 16x6 and it is up in the 9000 but the fuel mileage will drop
as the rpms go up.

    Earl
      ----- Original Message -----
      From: Mark Hunt
      To: discussion at nsrca.org
      Sent: Friday, April 30, 2004 6:53 PM
      Subject: webra prop


      Sirs:

      I have a friend who has a new Webra 1.20gt with pipe to put into a
pattern plane.  Anybody out there who can suggest a good prop size?

      TIA,
      Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040501/9c821be9/attachment.html