webra prop

[Mark Hunt]

Earl,

Thanks for the info.

Mark
  ----- Original Message ----- 
  From: Earl Vincent 
  To: discussion at nsrca.org 
  Sent: Friday, April 30, 2004 6:30 PM
  Subject: Re: webra prop


  Just had that setup on a Quest, I ran a 16x8 and a 15x10 both turning approx 8600 on the ground. you do not want to load that motor much lower than 8500 it is not a long stroke engine like the 145 but will produce decent power in the 8500-9000 range, I have a pumped 120 on my Goldberg Ultimate with a 16x6 and it is up in the 9000 but the fuel mileage will drop as the rpms go up.

  Earl
    ----- Original Message ----- 
    From: Mark Hunt 
    To: discussion at nsrca.org 
    Sent: Friday, April 30, 2004 6:53 PM
    Subject: webra prop


    Sirs:

    I have a friend who has a new Webra 1.20gt with pipe to put into a pattern plane.  Anybody out there who can suggest a good prop size?

    TIA,
    Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040430/59815a6a/attachment.html