twisting long extensions

[Lance Van Nostrand]

Unless you get the ground (black or brown) wire to wrap the other two at
least 5 times/inch then it will do you no good.  Clamp the wire ends in a
vise and drill, heat with a heat gun, then twist and cool.  don't over twist
or you'll overstress the wire.
--Lance

----- Original Message ----- 
From: "David Wartel" <d.wartel at comcast.net>
To: <discussion at nsrca.org>
Sent: Thursday, April 22, 2004 10:18 PM
Subject: twisting long extensions


> I remember reading somewhere that long servo extensions should be twisted.
> Should the individual extensions be twisted; should they be twisted around
> each other if there is more than one; or both if there is more than one?
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.