Sanding

[Karl G. Mueller]

Steve,

Yes, I use the fine grade for the final sanding (not really removing much)
on most curved and compound balsa surfaces before applying Monocote.
I also found these good for taking the glaze off of Fiberglass or Epoxy
molded parts to prepare those for painting. 

Karl G. Mueller
kgamueller at rogers.com



  ----- Original Message ----- 
  From: Patternrules at aol.com 
  To: discussion at nsrca.org 
  Sent: Thursday, April 22, 2004 9:02 PM
  Subject: Sanding


   Anyone use the 3M sanding pads that have the foam backing? 


  Steve Maxwell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040422/c5da0d9a/attachment.html