12/24 volt schematic

[Alan Hewson]

Mike
Thanks for reminding me. I just deleted the files.
Alan

  ----- Original Message ----- 
  From: mdarr00 at comcast.net 
  To: discussion at nsrca.org 
  Sent: Monday, April 19, 2004 9:08 PM
  Subject: Re: 12/24 volt schematic


  Alan,

  As you most likely already know, the schematic I sent you is wrong.  I just drew up a new one.  The mistake I made is putting in a two terminal switch.  It needs a three terminal switch.  The schematic I sent you will cause a direct short to ground.  I will get the new schematic scanned, and I will e-mail it to you as soon as I do.  You may want to remove the original from the website for now.

  Sorry,

  Mike Darr
    ----- Original Message ----- 
    From: Alan Hewson 
    To: NSRCA 
    Sent: Sunday, April 18, 2004 9:28 PM
    Subject: 12/24 volt schematic


    I have posted a schematic diagram to make your flight box have 12 or 24 volts for your starter. The diagram and design is courtesy of Mike Darr ( mdarr00 at comcast.net )

    Click on the following link to see drawing.
    http://www.countryworkshop.ca/planes/great_ideas.htm

    Alan Hewson



    Laughing is good exercise......It's like jogging on the inside.

    For all your Picture Framing needs, go to www.countryworkshop.ca


     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040419/7e952346/attachment.html